Each mic has a strong,
durable Gold Plated 1/8 inch (3.5 mm) mini-stereo plug.
Iriver
Omni Mono Microphone Specifics
This mic is available due to requests from members of the Video
University Forums. :)
The Iriver recorder requires a mono microphone to have a certain type
of mono plug in order to record in the mono mode. If the Iriver
detects a stereo plug it will automatically switch to stereo mode.
To avoid this the "+" of the mic has to be connected to the the ring of
the plug. "Tip" is left open. The Iriver thus detects it as
a mono mic.
Our Iriver Omni Mono Microphones are wired this way.
Another different feature of this mic is the use of a more sensitive
microphone capsule. It is the same one used on the
Mini
Mono Gold and
Stereo Oak
mics.
They are -35 decibels
+4 decibels sensitive and have a 20 to
20,000 hz frequency range. Sound to noise ratio is > 62 dB.
Ideal for recording speech.
You will not be disappointed in the sound quality of these mics.
They are perfectly suitable for the Iriver recorder, will allow
recording in the mono mode and are being used by some customers for
wedding videogaphy.
Custom iPhone / iPhone Video Mics
With Four Pole
Plugs
This is a plug that is
soldered to the cable. Not
an adapter.
Finally an external
mic for iPhones that use four pole plugs!
The same cable all the other mics are made with are used on
this.
Custom
made for the Iphone, these are especially usefull when shooting video
of your self with a iPhone Video
G3.
back to the
top of the page
Neutrik NTP3RC-B
Right Angle Gold
Plated Plugs
This is a plug that is
soldered to the cable. Not
an adapter.
These
low profile Neutrik NTP3RC-B right
angle plugs work well for recorders with recessed input
jacks.
These
are the best right angled gold plated plugs available anywhere, in my
opinon.
back to the top of the page
